中国建筑业协会标准：智慧工地全景成像监测标准

前 言

根据中国建筑业协会《中国建筑业协会团体标准管理办法(试行)》(建协〔2017〕14号)和《关于开展第三批团体标准申报立项工作的通知》(建协函〔2019〕12号),标准编制组经广泛调查研究,认真总结实践经验,参考有关国际标准和国外先进标准,并在广泛征求意见的基础上,编制了本标准。

本标准的主要技术内容包括:1 总则;2 术语和定义;3全景成像测量目标;4全景成像测量设备基本参数;5全景成像测量技术要求;6全景成像测量设备位置稳定性要求;7全景成像测量方法;8资料整理与归档。

如有意见或建议,请寄送金钱猫科技股份有限公司(地址:福建省福州市台江区江滨路58号,邮政编码:350009)。

本标准主编单位:中国建筑业协会工程技术与BIM应用分会

金钱猫科技股份有限公司

本标准参编单位:

本标准主要起草人员:

本标准主要审查人员:

目 次

1 总则 ····································································································· 1

2 术语和定义 ···························································································· 2

3 全景成像测量目标 ··················································································· 3

4 全景成像测量设备基本参数 ······································································· 5

5 全景成像测量技术要求 ············································································· 6

6 全景成像测量设备位置稳定性要求 ······························································ 7

7 全景成像测量方法 ··················································································· 8

8 资料整理与归档 ····················································································· 18

本标准用词说明 ·························································································· 19

引用标准名录 ····························································································· 20

1 总 则

1.0.1 本标准规定了智慧工地全景成像测量方法。

1.0.2 本标准适用于智慧工地全景成像监测标准。

2 术语和定义

2.0.1 智慧工地 smart construction site 智慧工地是指运用信息化手段,通过三维设计平台对工程项目进行精确设计和施工模拟,围绕施工过程管理,建立互联协同、智能生产、科学管理的施工项目信息化生态圈,并将此数据在虚拟现实环境下与物联网采集到的工程信息进行数据挖掘分析,提供过程趋势预测及专家预案,实现工程施工可视化智能管理,以提高工程管理信息化水平,从而逐步实现绿色建造和生态建造。

2.0.2 全景成像 panoramic imaging

可360度监测覆盖全景视图,采集四周的影像。

2.0.3 全景成像测量设备 panoramic photogrammetric instrument

全景成像测量设备是可实现360°的监控效果,并对监控目标进行精确测量的测量设备。

2.0.4 全景基准面 panoramic base level

全景基准面是指面积占全景范围80%以上的水平连续施工平面。

2.0.5 最大变倍 maximum optical zoom

光学透镜最大化放大图像。

2.0.6 光轴 optical axis

通过镜头中心点的光束的中心线。

2.0.7 冷存储cold storage

冷存储就是备份类数据不经常使用,以低能耗大容量的方式存储起来。

3 全景成像测量目标

3.0.1 物体直径测量目标范围:

板筋直径、梁筋直径、柱筋直径、箍筋直径。

3.0.2 物体间距测量目标范围:

板筋间距、梁筋间距、梁上箍筋间距、柱上箍筋间距、梁宽间距、模板间距、脚手架间距。